Thingiverse

SS Logo

by aasisodiya

0 Downloads

0 Likes

0 Makes

# SS Logo

- Prints perfectly if adhesion is good

## Print Time

| Component | Time |
| --------- | --------- |
| SS Logo | 2-3 Hours |

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for SS Logo?

Any FDM printer should handle SS Logo just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print SS Logo?

According to the design notes, SS Logo takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is SS Logo available in?

SS Logo is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is SS Logo free to download?

Yes, SS Logo is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

SS Logo

Similar Models

Add to Collection