SSD1306 OLED display panel mount (update)

Panel mount for the 26x26 OLED display (SSD1306, 128x64, I2C).

(update) Three different depths + more flexible snap fit, keeping it from breaking so easily.
The inside diameter has been made slightly larger (~0.2mm).
It might still be a snug fit when the OLED modules are not properly sized. I recommend filing the PCB edges slight.
Otherwise, you can always print an oversized version and enlarge the mounting hole of your panel.
The outside dimater is the same to stay compatible with my existing metal enclosures..

This design should snap into place when using a panel from 2 to 4 mm thick.
The minimum hole size is 28 x 27.5mm (tested with 3d printed panel). The display mount itself is 27.8 x 27.3mm.

The display is mounted inside by friction. But you can additionaly melt the studs that go through the screw holes on the PCB to permanently fasten it into place.