Stable Bipod feet

I saw a bipod on amazon and modeled these feet after it. make sure to have a small hook so you don't have to disassemble the entire bipod, the spring that pulls the feet back up after extension is hooked onto the m3 screws that I used to put these together so when you push the pins out you'll need to pull the spring back down to realign it and insert the screw.
I have modeled a peg foot with alignment pins for the feet so they stay straight, I will print and test them before uploading them.
I have added the spring pick you can use it to retrieve the spring but its still best to use a string to pull the spring up and shove the screw through.

5/7 EDIT ultimate set

uses m3 screw and nut kit I got from amazon.
Kadrick 1250 Pcs M3 https://www.amazon.com/dp/B0BRWCFD6Q?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1