MakerWorld

Organizers

Stackable 32mm Minature tray

by Latte · Organizers

20 Downloads

4 Likes

11 Makes

Stack-able 32mm miniature traysIncludes slots for 5mm x 1mm Magnets.Designed to fit 2 racks in a Really Useful Box 4lt or 9lt/9ltxl basically 2 on an A4 sheet.

Category

Organizers

Source

MakerWorld

Published

02.01.2026

Updated

03.05.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required Hardware needed

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Stackable 32mm Minature tray?

Any FDM printer should handle Stackable 32mm Minature tray just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Stackable 32mm Minature tray need supports when printing?

Yes, Stackable 32mm Minature tray will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Stackable 32mm Minature tray available in?

Stackable 32mm Minature tray is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Stackable 32mm Minature tray free to download?

Yes, Stackable 32mm Minature tray is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Stackable 32mm Minature tray

Similar Models

Add to Collection