Stackable 5oz cat food can organizer

Slim profile can rotation system designed to hold a lot of cat food cans. Stacks vertically, so you can fill up available space in a tight pantry or cabinet. Can be printed without any additional hardware, and holds together reasonably well with friction, although glue is recommended. A single layer holds 7-8 cans, depending on how they fall into the unit. PrintingThis isn't a terribly difficult part to print, but you'll want to make sure you print the right parts. There are two print profiles, one labeled bottom and one labeled stackable. You will always need to start with the bottom of a stack, and so you should print the profile titled Bottom. You will not need to print the profile titled Stackable. When printing units that will stack atop a bottom, you should not print the Bottom profile. You should print the profile titled Stackable If you buy the hardware pins (5x20) from Bambu studio, or have some of your own on hand, you will not need to print the plate titled Pegs, whi