MakerWorld
RC
Go to Model
Stackable RC Car Ramp
43
Downloads
13
Likes
18
Makes
Stackable RC car ramp/jump, prints on any 256x256x256 or larger printer without supports. I also have a variant that fits the a1 mini:https://makerworld.com/en/models/2143915-stackable-rc-car-ramp-fits-a1-mini#profileId-2322383 Each section is 242mm wide and 120mm high, and costs 212g of filaments, and use the parts “main ramp” and “mid wall”. You print and stack as many as you want, and finally you print the “end wall”, it costs 27g of filament. Or if you just want a one section wide ramp, you print all parts and get a WxHxD = 245x120x245mm ramp for 239g of filament. The sections and the supports are all screwed together with the BT3x8 SHCS Self Tapping Screws that are included in the Maker's Beginner Kit or bought separately. You need 2-3 screws for the support and 2-3 screws for either the end wall or to join next section, i.e. 4-6 screws per section.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
