Thingiverse
Stackable Shelf Tray for display stand 75mm
19
Descargas
16
Likes
0
Makes
This is a "trapper keeper" shelf for the display stand. It will hold minis that don't have round bases or any particular shape. It has a 3mm track all the way around and it will stack with the others in the set here:
https://www.thingiverse.com/asteroidsfredster/designs
The only supports that it needs are for the 4 holes in the bottom. No supports will be generated on the top.
It's 150mm x 150mm and 75 mm tall. Printed at 0.16 at normal parameters it will print in just at 15 hours.
Use a good % infill to strengthen the pillars. There is a 0.2 mm clearance on the sides and a 0.4mm clearance for the pillar/posts in the stack side on all of these. Some of the other posts have the stp and the fusion360 file with the set if you want to modify it.
Post any makes and thank you for considering it. They do look great printed.
https://www.thingiverse.com/asteroidsfredster/designs
The only supports that it needs are for the 4 holes in the bottom. No supports will be generated on the top.
It's 150mm x 150mm and 75 mm tall. Printed at 0.16 at normal parameters it will print in just at 15 hours.
Use a good % infill to strengthen the pillars. There is a 0.2 mm clearance on the sides and a 0.4mm clearance for the pillar/posts in the stack side on all of these. Some of the other posts have the stp and the fusion360 file with the set if you want to modify it.
Post any makes and thank you for considering it. They do look great printed.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
