Thingiverse
Stackable Toilet Paper Dispenser V2
par OspreyGozo
57
Téléchargements
63
Likes
1
Makes
This is an upgrade over my older model https://www.thingiverse.com/thing:3136805
This one is sturdier, uses dovetail joints and, depending on your printer's calibration, might not need glue for the parts to fit together. If you really need to use glue, super glue will do. The holder can be mounted to a wall using 3 screws.
The model is printed in parts to make it easier to print and to take advantage of orientation for strength. The parts are already oriented and have a chamfer at the bottom to counter elephant foot (which could make fitting the parts harder).
This one is sturdier, uses dovetail joints and, depending on your printer's calibration, might not need glue for the parts to fit together. If you really need to use glue, super glue will do. The holder can be mounted to a wall using 3 screws.
The model is printed in parts to make it easier to print and to take advantage of orientation for strength. The parts are already oriented and have a chamfer at the bottom to counter elephant foot (which could make fitting the parts harder).
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
