MakerWorld
Hueforge & Lithophane
Zum Modell
Stafford dog
1
Downloads
5
Likes
1
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4PLA Overture Matte Light Brown Transmission Distance: 0.6PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #12 (1.04mm) swap to Cocoa BrownAt layer #19 (1.6mm) swap to Light BrownAt layer #24 (2mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
