Stand for bjd doll

Support for bjd doll, for the base an acrylic plate of 12mm thick by 110mm wide and 130mm long is used, other material such as wood can be used. 3/16 threaded rod and its respective nuts are used for the column. For the arms, M3 screws with a length of 20mm were used with their nuts, the base was made because with the use of the wrist it tends to wear out and cannot support itself, it can also be used to start with stop motion.

An apology for using metric and english screws, since I am from Mexico it is very difficult to find metric threaded rods.

The doll shown in the images is scaled by Cura to 1.6: 1 or 160% of its original size. So I upload the ipt files so that if you want they can be modified.

Material's list.

A 3/16 threaded rod.
6 3/16 nuts.
9 M3 X 20mm screws
9 M3 nuts
Acrylic or other material base.