stand for speakers diy

Hello everyone, I'm presenting a cool, simple, yet very interesting project for speaker stands. We're printing two of each table. One model is the top, which features reinforcements with 90% fill under the screws and self-adhesive gel bumpers in places where the speakers can be attached to ensure they stay firmly in place. The bottoms, which are reinforced from below and pause during printing to insert four M8 nuts for later screwing in the leveling spikes, are also included. We also need 6 meters of 20x20x1.5-2 mm profile. I used a galvanized steel profile cut into eight 74 cm sections, painted with matte black varnish, and a second coat of textured varnish for plastics or car bumpers, which creates a textured finish and an effect almost reminiscent of powder coating. Insert the cut profiles into one of the bases, mark the exact screw locations, drill with a 5mm drill bit, and tap with an M6 tap. I used 16mm black Allen screws to screw them together. The other side is the same