Thingiverse
Robotics
Voir le modèle
Stand for SpotMicroESP32
17
Téléchargements
17
Likes
1
Makes
Stand for SpotMicroESP32.
Required Printed Parts:
- Stand.stl (2x)
- StandConnector.stl (2x)
- StandFoot.stl (4x)
Required OtherParts:
- M3 nuts (8x)
- M3 screw length 12 mm (8x)
Recommended Materials:
- PLA (30%): Stand.stl, StandConnector.stl
- Ninjaflex (10%): StandFoot.stl
- Ninjaflex (10%): StandAntiSlip.stl
Changes 5 Jan 2021:
- added optional StandAntiSlip.stl to avoid that robot slides in stand while testing
- added optional Stand_TopHalf.stl and Stand_BottomHalf.stl which should be glued together. These parts can be used if the stand.stl does not fit the printbed
Required Printed Parts:
- Stand.stl (2x)
- StandConnector.stl (2x)
- StandFoot.stl (4x)
Required OtherParts:
- M3 nuts (8x)
- M3 screw length 12 mm (8x)
Recommended Materials:
- PLA (30%): Stand.stl, StandConnector.stl
- Ninjaflex (10%): StandFoot.stl
- Ninjaflex (10%): StandAntiSlip.stl
Changes 5 Jan 2021:
- added optional StandAntiSlip.stl to avoid that robot slides in stand while testing
- added optional Stand_TopHalf.stl and Stand_BottomHalf.stl which should be glued together. These parts can be used if the stand.stl does not fit the printbed
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
