Thingiverse
Standard Cuvette
4
Downloads
2
Likes
0
Makes
The general purpose of these designs are described in “3D Printed UV-vis Cuvette Adapter for Low Cost and Versatile Spectroscopic Experiments”, which is published in the open access journal ACS Omega. Link to publication: http://pubs.acs.org/doi/abs/10.1021/acsomega.7b01310
This particular part is meant to mimic traditional quartz and glass UV-Vis Spectrometer cuvettes. In this design, we have a path length of 10 mm and a sample volume of approximately 2.4 mL. This cuvette can be used in most standard UV-Vis spectrometers. We recommend printing this design with a black filament to reduce the amount of light scattering.
An instructional video to assemble the spectrometer is shown below (post-printing) with the materials used listed. Either quartz or glass windows can be used depending on the spectral range needed of the cuvette.
This particular part is meant to mimic traditional quartz and glass UV-Vis Spectrometer cuvettes. In this design, we have a path length of 10 mm and a sample volume of approximately 2.4 mL. This cuvette can be used in most standard UV-Vis spectrometers. We recommend printing this design with a black filament to reduce the amount of light scattering.
An instructional video to assemble the spectrometer is shown below (post-printing) with the materials used listed. Either quartz or glass windows can be used depending on the spectral range needed of the cuvette.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
