Star Wars BB-9E

This is a remix of wkarraker's nice BB-8 and uses his BB-8 body design as a foundation for bB-8's nemesis, BB-9E. This is a work in progress and I will be adding the other pieces as I complete the design and test fit the parts..

Printing Instructions:

Printed using Monoprice Select Mini V1 - I used a combination of .0875 and .175 layer heights. These are multiples of the "magic numbers" for the stock MP Select Mini. I will note what layer height was used for each piece. I used a top and bottom thickness of 1.2 and sides of 1.2. In general I used 10% infill and 50mms for travel speed, except as noted.

BB-9E_Head_New.stl - Print one copy. I used a combination of Black and Silver PLA. I printed the head at .0875 layer height, 35 mms & 10% infill. I edited the GCODE to add an M600 command at layers 8, 16, 205, 225, 236 and 242. I started using black PLA and when the pauses occured, alternated between silver and black. If your printer is tuned in well, this will result in a much cl