Slicer Discord
3DSEARCH / Hueforge & Lithophane / Star Wars bookmark 2
Star Wars bookmark 2 – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

Star Wars bookmark 2

by Mano's 3d_Art · Hueforge & Lithophane
39 Downloads
38 Likes
30 Makes
Go to Model
BOOKMARKSET Star Wars 2 of 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 38.39x160.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Cyan Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #13 (1.12mm) swap to Cyan At layer #20 (1.68mm) swap to Jade White for the rest.
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Flying Dragon Flaming Hueforge
Flying Dragon Flaming Hueforge
by matthewsmessmakers
♥ 4
BARREL AND SAILOR CAP
BARREL AND SAILOR CAP
by lmc prod 3d
Sculpture hueforge
Sculpture hueforge
by JoJo BzH Hueforge
↓ 31 ♥ 28
Mickey hueforge
Mickey hueforge
by JoJo BzH Hueforge
↓ 5 ♥ 3
Medieval Femme
Medieval Femme
by JoJo BzH Hueforge
↓ 3 ♥ 8
Alien, Xenomorph hueforge
Alien, Xenomorph hueforge
by Mysstra3Dart
↓ 183 ♥ 91
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection