Thingiverse
Starbox Generator
door pilotneko
101
Downloads
88
Likes
1
Makes
In an effort to better understand OpenSCAD, I challenged myself to put together a little starbox generator. Use the SCAD file or Customizer to generate n-sided starburst containers. I've printed a few samples (sorry, I only have natural PLA), and the parameters are in the Print Settings below.
I find that these boxes print very nicely at 0.2 mm layer height in PLA. The lids snap onto the boxes nicely and hold in place if you have a well-calibrated printer. I'm using a Printrbot Simple Metal with an E3D V6 with a 0.4 mm nozzle. I usually print with a wall thickness of 0.8 mm (two shells), and a bottom wall thickness of 1.0 mm.
This is my first upload, so please feel free to comment and leave suggestions. Thanks!
I find that these boxes print very nicely at 0.2 mm layer height in PLA. The lids snap onto the boxes nicely and hold in place if you have a well-calibrated printer. I'm using a Printrbot Simple Metal with an E3D V6 with a 0.4 mm nozzle. I usually print with a wall thickness of 0.8 mm (two shells), and a bottom wall thickness of 1.0 mm.
This is my first upload, so please feel free to comment and leave suggestions. Thanks!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
