Starcraft : Jaedong - Hueforge

Hueforge of Lee Jae Dong, The Tyrant, the best zerg of starcraft broodwar. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x125mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.6mm and the Actual Depth is 1.6mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.1 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Mistletoe Green Transmission Distance: 5 PLA PolyLite Green Transmission Distance: 1 PLA BambuLab Basic Yellow Transmission Distance: 5.2 PLA BambuLab Matte Ivory White Transmission Distance: 3.4This print uses 6 unique filamentsSwap Instructions: Start with Charcoal At layer #13 (0.64mm) swap to Green At layer #17 (0.8mm) swap to Mistletoe Green At layer #19 (0.88mm) swap to Green At layer #21 (0.96mm) swap to Yellow At layer #30 (1.32mm) swap to Ivory White for the rest.