StarWars - hueforge

by Jans120 · Art/Other Art

15 Downloads

2 Likes

0 Makes

Go to Model

The Model is 106.08x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Black Transmission Distance: 0.3 PLA Blue Transmission Distance: 4 PLA Red Transmission Distance: 4 PLA Yellow Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #20 (1.68mm) swap to Yellow for the rest.