Stealthy's RetroPI case

Hey Guys, and Gals.

Nothing to fancy to see here, just a simple RPI case that suites what I wanted as far as looks, and use.

all the holes on the side covers are made to be able to fit a standard M3 screw, so if you wanted you could add different things inside with adapters, for example an internal SSD, or a controller holder on the outside.

your parts list is as follows

1. 1 - Main Body
2. 1 - Left side cover
3. 1 - Right side cover
4. 4 - Spacers
5. 2 - 30cm Usb Panel mount (30mm spacing between holes)
6. 1 - 12mm momentary switch (I used a 12v version)
7. 4 - M3X16mm Steel Hex Socket Flat Head Cap Screws
8. 18 - M3X8mm Steel Hex Socket Flat Head Cap Screws
9. 1. Raspberry PI (I used a PI3 B+)


I used these videos to setup the button with led

Power Button config

https://www.youtube.com/watch?v=4nTuzIY0i3k

Led Config

https://www.youtube.com/watch?v=of2p-FHg6nY



If I forgot anything please let me know