Thingiverse
Steambot Keychain
von 3DE_Study
21
Downloads
19
Likes
1
Makes
Coming at ya with another robot keychain. I wanted to go with a steampunk vibe this time. To print this little guy out is quite simple and is exactly the same as all my other keychains (check those out if haven't already). But as usual, I shall go over the directions anyways:
Best recommended for higher quality settings to get the little bolt detailing as solid as possible. It takes a little longer, but it's worth it.
It is recommended that this guy be printed out on a raft. Be sure to let the print cool to avoid warping any of the joints.
Dimensions: 98.2mm x 66.7mm x 22mm
I printed this out with a 0.4mm nozzle on high quality and it worked out fine. However you can't go wrong with something smaller such as a 0.25mm nozzle (in fact, I'd recommend it).
If you have read all that I have had to say, then I want to thank you while you're still here. Thank you for spending your valuable time to read and view my work. If you can, please leave feedback or a like (or both). Draw
Best recommended for higher quality settings to get the little bolt detailing as solid as possible. It takes a little longer, but it's worth it.
It is recommended that this guy be printed out on a raft. Be sure to let the print cool to avoid warping any of the joints.
Dimensions: 98.2mm x 66.7mm x 22mm
I printed this out with a 0.4mm nozzle on high quality and it worked out fine. However you can't go wrong with something smaller such as a 0.25mm nozzle (in fact, I'd recommend it).
If you have read all that I have had to say, then I want to thank you while you're still here. Thank you for spending your valuable time to read and view my work. If you can, please leave feedback or a like (or both). Draw
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
