Stich Hueforge Bookmark/keychain

Printing tipsDo not simplify the model. Dont scale the Z-Axis, otherwise the color layers no longer fit. Apart from the Z-axis, the model can be scaled as desiredThe Model is 50x95mm in sizeThere are the stl files and the 3mf for anycubic slicerHueForge Print & Swap DescriptionUsing a 0.4 NozzleIMPORTANT -> Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:#ffffff PLA Anycubic White Transmission Distance: 11 #003594 PLA Anycubic Blue Transmission Distance: 2.9 #ff8da1 PLA Anycubic Pink Transmission Distance: 3 #c8102e PLA Anycubic Red Transmission Distance: 7 #00557f PLA Anycubic Metalic Blue Transmission Distance: 0 #000000 PLA Anycubic Black Transmission Distance: 0.8This print uses 6 unique filamentsSwap Instructions:Start with White At layer #6 (0.56mm) swap to Blue At layer #11 (0.96mm) swap to Pink At layer #14 (1.2mm) swap to Red At layer #19 (1.6mm) swap to Metalic Blue At layer #25 (2.08mm) swap to Black for the rest.