Stick Shift Inspired Fidget Toy

My first ever public model, inspired by other stick shift fidgets and designed from the ground-up! This model has a larger profile to improve ease-of-use, a spherical roof for smoother stick movement, 9 different locking positions, and is entirely print-in-place!

I've included two different versions: One with numbers, and one without numbers. The numbers represent my favorite order to move between each of the positions, from 1 to 9. Try to beat my personal best time of 4.5 seconds!

With Numbers:
I strongly recommend using a .2 mm nozzle if you have one available. Some details in the numbers disappear if a regular 0.4 mm nozzle is used. I personally prefer a 0.16 mm or 0.12 mm layer height with this version this version.

Without Numbers:
Any layer height with 0.4 mm nozzle should be good. I've printed in 0.16 mm and 0.20 mm with no issues.

This model is impossible to print without supports! I recommend tree supports for best results.

All test prints were done in PLA. I am no