Still Air Box

This is a still air box or S.A.B. used for propagating spores for mycology. Gaskets should be printed in TPU. Brackets can be made with PLA or PETG.Parts Needed: - (18x) M3x20mm Screws and nuts (M2.5 can be used. Maybe M4 as well.) - (1x) 8x10 Plexi-glass panel (https://www.amazon.com/dp/B099D9PF6S) - (1x) plastic storage containerAssembly Instructions:1. Remove supports and file down joints on the window brackets. (Figure A) These are for cosmetics only.2. Use the outside window panel with the screw head insets as a template to trace an opening on the top of your plastic box. Mark each screw hole. (Figure B)3. Cut window opening and screw holes. Clean up edges the best you can.4. Assemble the outside window panel by connecting the window bracket that has the screw head insets. Place screws into the bracket so the screw heads are in the recessed holes. Lay panel down with the screw heads down and place plexi glass panel inside the recessed area of the window bracket. Place the TPU gask