stitch angel hueforge

Project: stitch angel balancoire.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA bambulab basic majenta Transmission Distance: 3.2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #10 (0.88mm) swap to Red At layer #12 (1.04mm) swap to Ice Blue At layer #18 (1.52mm) swap to Dark Brown At layer #20 (1.68mm) swap to majenta At layer #21 (1.76mm) swap to Jade White for the rest. pour ceux qui n ont qu un seul amspause lig