stitch hueforge

Project: stitch nutella.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 10 unique filamentsSwap Instructions: Start with Dark Brown At layer #3 (0.32mm) swap to Yellow At layer #7 (0.64mm) swap to Dark Brown At layer #10 (0.88mm) swap to Blue At layer #13 (1.12mm) swap t