Stitch Length Adjuster V2 (Sailrite compatible)

Stitch Adjuster V 2.0What is thisThis is the second iteration of the 3D printable stitch length adjuster for Sailrite LSZ-1 (LS-1) and other common machines with drillings in this location.Make sure you adjust the plate to be in the center. (i.e. forward 1.5 and reverse 1.5 stitches travel the same distance) I would love to hear from you if you if you find this project interesting! Perhaps look at my other related projects. Additional parts and toolsYou will needtwo flat headed M3x30 bolts (DIN 912),five countersunk M3x10 bolts(DIN 963) andseven M3 heat set inserts with a length <= 6mm.five for the rail and two for the knobstwo small m3 washers for the adjuster screwsAll other parts are 3D printed. This version of the adjuster works with your existing bolts. Please do not forget to print the spacers that are slotted in between the adjuster and the machine housing.The white stripes were added using a white permanent marker. Print settingsPrinted without supports on a 0.4mm nozzle with l