Stitch Samurai

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 130x130mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #3 (0.32mm) swap to White At layer #8 (0.72mm) swap to Black At layer #12 (1.04mm) swap to Red At layer #19 (1.6mm) swap to White for the rest.