Stitch Skylwaker using the force

Stitch using the force.The famous scene of Satr Wars The empire strokes back. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.16mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used:PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA PolyTerra Muted Blue Transmission Distance: 0.3PLA PolyTerra Arctic Teal Transmission Distance: 0.5PLA PolyTerra Cotton White Transmission Distance: 1.5This print uses 4 unique filaments Swap Instructions:Start with Charcoal BlackAt layer #8 (0.72mm) swap to Muted BlueAt layer #12 (1.04mm) swap to Arctic TealAt layer #21 (1.76mm) swap to Cotton White for the rest. EnjoyBoost MeYour boost help me.Thanks a lot.Greg