Stitch Vader

After Stitch Skylwalker (https://makerworld.com/en/models/499359#profileId-414046) here is Stitch Vader. Project: _d159c9b0-de0a-4f60-b38b-b7159959cbd7.jpgPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 130x130mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2.4mm and the Actual Depth is 2.4mm Filaments Used:PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA PolyTerra Cotton White Transmission Distance: 2.5PLA PolyTerra Fossil Grey Transmission Distance: 0.3PLA PolyTerra Lava Red Transmission Distance: 1This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #12 (1.04mm) swap to WhiteAt layer #13 (1.12mm) swap to GreyAt layer #16 (1.36mm) swap to WhiteAt layer #20 (1.68mm) swap to RedAt layer #27 (2.24mm) swap to White for the rest. Boost MeYour boost help me.Thanks a lot.Greg