Storage in Filament box

This is something I made to store my bolts. M3 - M6 bolts up to 60 mm fit great there (Longest bolts in photos are 50 mm long). It is designed to minimize material usage and print time while keeping the end result sturdy. I did not use labelspace models but the 10 mm wide strip is meant to provide space for label while not taking away from storage space. Labelprinter, permanent marker or taping a paper should work fine.210x200 mm snugly fits my boxes, tried on two other brands as well. The box top closes fine if you cut the ears. You might want to check your box to see before printing, worst case you can scale XY to fit your box in slicer. Slicer should be able to handle the scaled wall width. Provided f3d model is meant to be customizeable and is modeled to hopefully make reasonable changes as easy as possible. Printed in Natural PLA. One 4x4 container is 140-150 g with 1.2 mm thick walls (for 0.6 mm nozzle) and prints under 2 hours on my RR3.1 with Rapido UHF. You can go lower weight