Stormtrooper Hueforge

Project: Stormtrooper_mit_Hut.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x213.26mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Dark GrayAt layer #13 (1.12mm) swap to GreyAt layer #20 (1.68mm) swap to White for the rest.