Stormtrooper

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.16mmThe Max Depth is 1.4mm and the Actual Depth is 1.5mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5.1This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #5 (0.48mm) swap to Blue At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to Jade White for the rest.