Straight line Deployment Markers

First foray into Tabletop gaming aids. Deployment markers for WH40K! Because setting up deployment zones with chopsticks ruins the aesthetic (it's what I used to do) Measures 220mm length x 15mm deep x 5mm high. Was originally printed on a Bambu Labs A1 with AMS feed with Bambu PLA Basic in Black, Blue and Grey. Settings were as follows: .4mm nozzle, 12mm layer height, 2 walls, 15% infill. Obviously requires no supports and they have been “Painted” using Bambu Slicers paint tool so you can swap up the colours as you desire or go all one colour if you don't have access to AMS. I suspect I will get better results with the lettering and highlighted colour areas by going down to a .2mm nozzle and tighter layer height but currently have some large projects that are consuming bedtime. Best colour combination I believe will be a grey or black as the primary with a stand-out colour like Red/Yellow used on the lettering and arrows. Anyway, Enjoy. Love the print?https://buymeacoffee.com/