Stranger Things Eleven Head Hueforge

Please note there are 5 filaments, remember to configure and change your spools correctly with an AMS. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 176.43x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.88mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm #000000 PLA+ Sunlu Black Transmission Distance: 0.6 #565d65 PLA+ Sunlu Grey Transmission Distance: 2 #a09268 PLA+ Sunlu Burly Wood Transmission Distance: 2.5 #ffffff PLA+ Sunlu White Transmission Distance: 5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 5 unique filaments Other similar coloured filaments will work well.Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Grey At layer #16 (1.36mm) swap to Burly Wood At layer #19 (1.6mm) swap to White At layer #29 (2.4mm) swap to Red for the rest.