Stratocaster Spring Claw Drilling Guide / Jig

This jig makes a much easier time of the normally stressful job of drilling screw holes for a Stratocaster-style tremolo spring claw! PLEASE NOTE DIMENSIONS BELOW! There are several types of stratocaster bodies and claw hardware components. I've detailed out what I had below. If you need another dimension (i.e. hole spread or cavity depth), just let me know and I can modify it pretty easily. I have also now added a parametric version for you to customize yourself (this was generously generated and provided by user naanbread @naan_bread). You can use the “Customize” button to open in Parametric Model Maker and adjust parameters to fit your exact guitar. You will still probably want a long 1/8" drill bit to clear the body without risk of damaging it, but the jig helps consistently drill the holes without the bit wandering. The holes in the jig are at a 6-degree angle and are sized for a TIGHT 1/8" drill bit ( a 3mm should work too). I used 6 wall loops throughout the jig, so