StreamDeck + Pi4 + Bitfocus Companion

This is to hold a Streamdeck and a Raspberry Pi 4.

The Streamdeck should just snap into place in the hole in the front

There are 2 different back plates. One has some cable tidies in case you move your StreamDeck around a lot and one that has a flat back in case you want to push it up against something (watch out for overheating though)
Both backplates have space for a 5050 fan if you want some extra cooling.

You will need 4 M2 brass inserts for the poles on the Pi4_BasePlate_v1.0 piece
Youi will need 4 M3 brass inserts in the 4 normal holes in the Pi4_BasePlate_v1.0
You will need another 4 M3 brass inserts placed in the lugs on the back of the StreamDeck_Surround_V1.00

The Pi sits on a removable plate so you can change it out to a different SBC if you want to design your own. The holes that mount the plate to the surround are 100mm apart front to back, 65mm apart side to side (center to center) and they have a 5mm radius

There is space inside to mount some batteries