StreamdeckXL flight sim mount - VESA compatible

I have started flying the F/A-18 in DCS World and was giving thought to building out an [upfront controller panel](https://www.youtube.com/watch?v=WTDvU89QLRs) when I remembered I had a Streamdeck sitting around from a previous project. This is a simple case to mount a Streamdeck XL to anything with a 75mm VESA pattern. The tilt of the case can be adjusted but it's rigidly mounted along the other axes.

Assembly is pretty simple, see the exploded-view image. The case_mount inserts through the hole in the case from the top and is glued in place, it has a series of flanges to make a secure joint. The central bolts connecting the VESA_mount to the case_mount are 8mm, if you want to use hardware instead of printing the included bolt and nut. The case_top connects to the case with 2mm screws of your choice. The StreamdeckXL just sits inside and is held there by the lid; no need for any other mounting.

Since the monitor mount bar I use for UFC and MFDs is above the plate I was mou