Thingiverse

StretchBee

by CesiumSalami

119 Downloads

82 Likes

3 Makes

This is a quadcopter is designed for 3" props (UPDATE: there's a 2.5" [~66mm max] and 2" version now, too). I don't know about the stretch hype train on quads, but I wanted to try one out! So far this flies great! It'll fit the HQProp 3030's *just barely* (those are slightly oversized 3" props)

I'm running DYS 1104 6500kv motors, VTX03, OMNIBUS Nano F3, 1000tvl camera right now (that may or may not be out of focus or just suck). I'm only running 2s right now, but it should run 3s just fine. I'm using 500mah 2s batteries and the AUW is under 115g.

MAIN VERSION
============
"StretchBee_20x20_SlightlyStronger" - fits the GreenBee camera mount and a 20x20 mounting fc but has just a little more material in critical areas for strength. The battery strap holder should also more closely match the one on the original green bee. dxf file of this is posted in case you're interested in that (as shown in the main picture) [ i don't know why the file is so huge ..... ]

This is a dovetai

20x20 armattan carbon fiber fpv Furious piko BLX green bee miniquad piko blx quad Quadcopter quadrocopter 20x20 armattan carbon fiber fpv Furious piko BLX green bee miniquad piko blx quad Quadcopter quadrocopter

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format