Strix Goblin Air Unit mount

Very durable and secure camera mount, with airflow over the Air Unit and good antenna orientation. Rain could get into the usb port so I used some tape to cover it.

4 M2 screws and nuts are needed, to get the nuts in i used a screw to pul it in, pushing from the outside was too hard.
I located the hole locations with a single LED from the inside.
To get the camera precisely in the hole in the front I pushed it in from the outside and pured hot glue around it (last pic)

onshape link of this design:
https://cad.onshape.com/documents/4b437c1a970e1cb28b279cd8/w/f58c5e997c5b394a547947b3/e/40ac6d065d38ca6587e84861?renderMode=0&uiState=66f2b829403c2379fe5d1221