Thingiverse
Stylish Soap Dish
8
Downloads
10
Likes
0
Makes
Aesthetically pleasing modern design can be quite expensive so why not print it yourself for less? This model was designed to be as easy to print and assemble as possible with a detailed instruction booklet in PDF form, no supports, and properly oriented STL files.
This soap dish is designed to hold 2.5 by 4.5 inch soap, however, the model can be scaled for other soap sizes. I recommend the use of PETG for this model as it is non toxic, scentless, and can be cleaned by using the dishwasher, though PLA will work fine but is not dishwasher safe.
I have other similar designs on my profile if that interests you.
Designed using a 220mmx220mmx300mm print bed.
This model will use roughly 80 grams of filament at 15% infill with 2 walls. The total print time at .2mm layer height and 15% infill is 10h 14m.
This soap dish is designed to hold 2.5 by 4.5 inch soap, however, the model can be scaled for other soap sizes. I recommend the use of PETG for this model as it is non toxic, scentless, and can be cleaned by using the dishwasher, though PLA will work fine but is not dishwasher safe.
I have other similar designs on my profile if that interests you.
Designed using a 220mmx220mmx300mm print bed.
This model will use roughly 80 grams of filament at 15% infill with 2 walls. The total print time at .2mm layer height and 15% infill is 10h 14m.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!