Submarine Bath Toy

🚢 Submarine Bath Toy Make bath time a little more fun with the Submarine Bath Toy! Designed to float, scoop, pour, and explore, this playful submarine is a simple print that keeps kids entertained while making cleanup and drying easier for parents. The design features a built-in handle for easy carrying, a front pour spout for water play, and large openings that help water drain and air circulate after use. 🌊 Features Floats in water Built-in carry handle for little hands Pours water from the front opening Large openings help water drain quickly Faster drying than many enclosed bath toys Rounded, kid-friendly design No AMS required No glue required 🛁 Bath Time Fun Scoop water, pour water, float it around the tub, or send it on an underwater adventure. The front opening creates a fun pouring effect while the oversized side openings make filling and draining quick and easy. Unlike many bath toys that trap water inside, the larger openings help air circulate through the toy after use, allowing it to dry more quickly between bath time adventures. 🖨️ Printing Notes Supports required No AMS required No glue required Works great in PLA or PETG 🔧 Post-Processing After printing, carefully remove all supports to avoid damaging the model. For the cleanest finished appearance, lightly pass a butane torch over any rough support-contact areas or minor stringing. A quick pass is usually all that's needed to smooth the edges and improve the final look. Use caution when using a torch: Keep the flame moving and avoid overheating any one area. 🔧 Assembly Place the base on a flat surface. Place the top over the bottom part. Line up the 4 posts. Firmly press the top down so it fit snugly with the bottom part. ⚙️ Recommended Settings 0.20 mm layer height 2-3 walls 10–15% infill Enable supports Standard print speeds 💧 Designed for Real Bath Time Use The Submarine Bath Toy was designed to be easy to print without requiring an AMS or complicated assembly. Once supports are removed, s