Sunflower Hueforge

My print is with SUNLU Meta yellow and that's why it look paler, with BambuLab Basic Yellow will look better as the image from Huforge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 1 PLA BambuLab