Sunflower, HueForge

Project: Sunflower Gray.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 200x156.45mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 3This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.72mm) swap to Blue Gray At layer #12 (1.12mm) swap to Gray At layer #19 (1.68mm) swap to Jade White for the rest.