Sunlu spool adapter (#71 #72) for Bambu refill

Sunlu spool adapter (#71 #72) for Bambu refillThis is an adapter set which allows the Bambu standard refills to be mounted on the Sunlu spool (formed of sppol slides marked as #71-1 and #72-2).The assembling instructions are presented in the animation below:1 - Using a pencil, mark up the position of the clips on the Bambu refill using the locking slide as reference. The clips should be fit angled at 120°, as shown.2 - Install the three clips on the inside of the Bambu refill.3 - Fit the long Sunlu spool (marked #72) into the Bambu refill, fitting it tight on the clips.4 - Fit the round slider onto the spool.5 - Rotate the slider to lock the clips in place.6 - Turn the spool around.7 - Fit the short Sunlu spool (marked #71) into the Bambu refill, fitting it tight on the clips.8 - Fit the other slider onto the spool and rotate it to lock the clips in place. This can also be used to recover the refill and dismantle the spool, if you fit in place a set of strings or wire - but you need to