Sunny One Piece / Hueforge

Thousand Sunny One Piece - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x179.08mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.32mm     #000000 PLA BambuLab Basic Black Transmission Distance: 0.6     #00358e PLA BambuLab Basic Blue Transmission Distance: 4     #ff6a13 PLA Bambulab Orange Transmission Distance: 5.6     #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5     #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4     #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filaments Swap Instructions:     Start with Black     At layer #8 (0.72mm) swap to Blue     At layer #12 (1.04mm) swap to Orange     At layer #18 (1.52mm) swap to Cyan     At layer #20 (1.68mm) swap to Sunflower Yellow     At layer #24 (2mm) swap to Jade White for the rest.