Sunset Cat - HueForge Print

For all the cat lovers out there, here's a lovely print of potentially your favourite feline friend. The included 3MF file will already have all Bambu Studio/Bambu printer settings and layer swaps applied. If you do not use Bambu Studio or a Bambu printer, please download the STL and follow the following print instructions: Print instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.20mm. If you only have one AMS, once the black section is done printing, you can remove the black spool and replace it with the final colour (white). In your slicer, make sure slot Black and White are both assigned to the same slot (for example, A1). Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA CC3D Blue Gray Transmission Distance: 3PLA CC3D Orange Transmission Distance: 7.4PLA Sunlu Beige Transmission Distance: 8.2PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #11 (0.6mm) swap to Blue GrayAt layer #16 (0.