Super Mario

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 161.54x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA White Transmission Distance: 5This print uses 2 unique filamentsSwap Instructions: Start with BlackBorder Only Colors from here until the end. At layer #16 (1.36mm) swap to White for the rest.