Thingiverse
super simple DIRECT DRIVE tornado conversion (with bltouch)
by Pascal95
2
Downloads
1
Likes
0
Makes
direct drive system, 2 simple parts to print. still need to design the cooling channel but so far works wonders. I used 100% infill on pla.
you'll need a bunch of m3 screws, a e3d v6 hot end, a nema 17 damper to bolt it to the extruder (tight fit and might need to grind some touching bolts to prevent vibrations.
a bl touch is optionnal.
some bolts need to be reversed from their original position to fit in the extruding block.
a fan adapter is a good idea to mount a better hotend fan.
more infos coming soon.
happy printing!
you'll need a bunch of m3 screws, a e3d v6 hot end, a nema 17 damper to bolt it to the extruder (tight fit and might need to grind some touching bolts to prevent vibrations.
a bl touch is optionnal.
some bolts need to be reversed from their original position to fit in the extruding block.
a fan adapter is a good idea to mount a better hotend fan.
more infos coming soon.
happy printing!
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
