Thingiverse

Super73 bin with lid

von Roguebydesign

1 Downloads

1 Likes

1 Makes

Bin for Super73 Adventure Z. Goes on lower section of frame from bottom bracket back.
Use Two 3/32 steel dowels, the ones i found at the hardware store were 19mm long
Mounting bolts are M5x.8x15. Recommend stainless

***** NOTICE! my Super73 mount holes were not perfectly/equally placed by the manufacturer, Surprise surprise.... these things are less than perfect*******
Highly recommend printing the lower section only by cutting it in the slicer to verify fit.

Will barely fit on ender series printers. 235x235

Super 73 Super 73 adventure z Super 73 Bracket Super 73 Holder super 73 zz Super73 Super73 adventure Super73 adventure z Super73 holder Super73 redbull super73 z1 super73 zx

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat