Superman - Bookmark / Portrait

A stylized, vibrant depiction of Superman, rendered in an expressive manner reminiscent of comic book art with a modern, splash-art. SupermanPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. The portrait is on plate 1 and plate 2 consists of 2 separate bookmarks - same swaps.Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Ma